1400°C lab PID Control High Temperature Efficient muffle Furnace for 1400.C ceramic sintering
Many experiments and procedures taken in the lab requiring extreme heat environment from
400-1800.C. For this purpose, the high temperature muffle furnace steps in as the necessary
part of laboratory equipment. Xinyu furnace are providing the muffle furnace at a affordable cost
including box muffle furnace, crucible furnace, dental furnace, atmosphere furnace, vertical furnace, tube furnace and etc.
The sizes of the muffle furnace various from the smaller furnaces which are conveniently placed on
a workbench, to the larger units that has a coveted capacity and competent for all duty.
High purity fibrous alumina insulation for maximum energy saving 60-80% less power consumption
than other old style.
Heavy duty double layer structure with cooling fan to keep furnace exteriors safe to touch.
Double temperature controller to ensure furnace never over-shoot in any accident.
Muffle furnace specifications :
Chamber size: 300x200x200mm,12L.
Rated voltage: AC 380V 50/60Hz.;
Power: 9kW;
Max. Temperature :1400.C (< 1 hour) ;
Continuous Working Temperature:0-1350.C;
Max. Heating Rate:0-30.C /min;
Temperature Accuracy :+/- 1.C ;
Heating Elements : Sic heater.
Thermocouple: S type.
Temperature Control:
Led controller or touch screen controller optional;
Touch screen controller,easy to operation.Max.128 programmable segments for precise control,
so that you can set more temperature curve.
PID automatic control and auto-tune function.
Built-in over temperature alarm and protection allows for operation without attendant.
+/- 1 ºC temperature accuracy.
S type thermocouple installed for immediate use.
Optional:
The furnace may be operated by PC with a control module. Pls order a control module at extra cost.
If you order the PC control module together with the furnace, we will install and test it before shipping.
We recommend you to order a computer (laptop) from us to avoid software installation problems.
Application Notes
For preserving the longevity of the furnace components, we recommend the heating rate not to
exceed 10 °C /min.
Cooling rate should not exceed 10 °C /min either.
This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace
without necessary safety controls and supervision.
Small cracks may appear on the surface of the refractory ceramics over extended use.
This is a normal occurrence and the cracks may be repaired with alumina coating.
Warranty: One year limited warranty with lifetime support, excluding heating
element and ceramic tube damaged by user.
Attention: Any damages caused by the use of corrosive and acidic gases, and any damage
from wrong operate and use are not under the coverage of One Year Limited Warranty.