1700.C High vacuum horizontal hydrogen H2 gas sintering resistance furnace with Programmable Controller
Laboratory muffle furnace Application:
Muffle furnace mainly used in chemical analysis, physical decomposition and synthesis, super hard materials (such as ceramic), Rare and precious metal smelting and
purification, metal heat treatment of sintering process research and other scientific
experiments.Universities and colleges, scientific research institutes, medical and health,
petroleum chemical industry, mining enterprise, quality and technology supervision
agencies, and other units laboratory, laboratory are the use of such equipment.
1. Gravimetric analysis;
2. Sintering;
3. Quantitative analysis;
4. Heat treating;
5. Glass preparation;
High vacuum hydrogen H2 Muffle furnace Structure:
High purity alumina fiber insulation surrounding the chamber provides maximum energy efficiency.
Heavy duty double layer structure with cooling fan to keep furnace exteriors safe to touch.
Doble layer sreel case with forced air cooling to ensure lower saferface temperature.
One optional venting port is built on the top of furnace,need at extra cost.
High vacumm H2 Muffle furnace Specifications:
Furnace Material: SPCC or stainless steel.
Chamber size: 100x100x100mm,2L.
Rated voltage: AC 220V 50/60Hz.
Power: 2kW;
Max. Temperature :1700.C (< 1 hour) ;
Continuous Working Temperature:1650.C ;
Max. Heating Rate:0-20.C /min;
Temperature Accuracy :+/- 1.C ;
Heating Elements : MoSi2 heater.
Thermocouple : B type.
Vacuum gauge: thermocouple vacuum gauge.
Temperature Controller :
PID automatic control and auto-tune function.
50 programmable segments for precise control.
Built in protection for over-heating and broken thermocouple.
Large digital control panel for easy operation.
RS485 Communications Port optional.(need add extra cost ).
Max. Vaccum : 5 Pa or more bigger .it depend on clients' demand customized.
1700.C high vacuum hydrogen Muffle furnace Standard Sizes:
Type
|
Furnace size
|
Working/Max.temperature
|
Delivery time
|
1700.C high vacuum muffle furnace
|
100x100x100mm
|
1650.C/1700.C
|
1-3 days
|
1700.C high vacuum muffle furnace
|
200x150x150mm
|
1650.C/1700.C
|
1-3 days
|
1700.C high vacuum muffle furnace
|
300x200x200mm
|
1650.C/1700.C
|
1-3 days
|
1700.C high vacuum muffle furnace
|
400x300x300mm
|
1650.C/1700.C
|
1-3 days
|
Application Notes:
For preserving the longevity of the furnace components, we recommend the
heating rate not to exceed 10 .C /min.Cooling rate shall also not exceed
10 .C /min.
This furnace lacks vacuum sealing, toxic or explosive gases are not
recommended for use with this furnace without necessary safety controls
and supervision.
Small cracks may appear on the surface of the refractory ceramics over
extended use.
This is a normal occurrence and the cracks may be repaired with alumina
coating.
Warranty: One year limited warranty with lifetime support, excluding heating element and ceramic tube damaged by user.
Attention: Any damages caused by the use of corrosive and acidic gases,
and any damage
from wrong operate and use are not under the coverage of One Year Limited
Warranty.